Re-connecting Your System
Since your Sim has been de-activated, to reconnect your system follow the steps in the video below
To Re-connect Your System Follow the Steps Below
1.Take the Hub off the wall
2.Remove the back off the Hub (your alarm will sound when you remove this, you must disarm your alarm using the keypad to stop the siren ringing)
3.Connect the Ethernet Cable from your Modem, into the back of the Hub (as shown in the video above)
4.Place the bracket back on the Hub (alarm will sound again, disarm the system again using the Keypad)
5.Once this is connected, Hub will flash red, then turn white. You can now place hope back on the wall, your system is connected.