Safety Tips

What Happens to Your House Alarm When You Move Home?

What happens to your house alarm when you move home, a family unpacking boxes with HomeSecure

Moving house in Ireland comes with a to-do list that seems to grow by the hour. Somewhere between sorting the broadband and redirecting the post, a question surfaces that nobody really explains: what happens to the house alarm?  

Whether you are leaving a system behind, hoping to bring yours along, or walking into a new home with a mystery keypad on the wall, the answer is more straightforward than you might expect. This guide covers both sides of the move, from the home you are leaving to the one you are settling into, and lays out a simple plan for each. The good news is that getting your security sorted is one of the quicker jobs on the list. 

Quick Answer 

A wired house alarm is usually treated as a fixture and stays with the property, while a modern wireless alarm can typically be taken down and set up again at your new address, as long as you tell your alarm provider before moving day. 

Here are the key facts to keep in mind: 

  • Wired alarm systems are generally considered fixtures and remain with the house unless the contract of sale states otherwise. 
  • Always notify your monitoring provider of your moving date so your service is not interrupted. 
  • If the new home has an existing alarm, have it inspected and the codes changed before you rely on it. 
  • A new wireless alarm system can be professionally installed in around 2-3 hours. 

Does a House Alarm Stay With the House When You Sell? 

A wired house alarm is usually treated as a fixture and stays with the property when you sell. This is because hardwired systems are physically built into the walls, ceilings, and door frames. Unless your contract of sale specifically excludes the alarm, the expectation is that it transfers to the new owners along with everything else that is fixed in place. 

Wireless systems are a bit different. Because the sensors, hub, and keypad are removable without causing structural damage, they sit in a grey area. A seller can take a wireless alarm with them, but this should be agreed clearly during the sale process. The simplest approach is to raise it with your solicitor early and make sure the contract reflects what stays and what goes. This avoids any confusion on handover day. 

The simple rule of thumb: check your contract of sale. If you are unsure whether the alarm is included, ask your solicitor to confirm before completion. This is general guidance rather than legal advice, and the specifics can vary from sale to sale. 

Can You Take a Wireless Alarm With You When You Move? 

For most modern wireless systems, the answer is yes. Wireless sensors and hubs are designed to attach without permanent fixings, so they come down cleanly and can be set up again at a new address. This is one of the core advantages of wireless over wired setups. 

The practical steps are straightforward: 

  • Notify your provider well ahead of moving day so they can advise on removal and plan the reinstall at your new address. 
  • Arrange removal either professionally or following the provider’s guidance, depending on the system. 
  • Plan the reinstall at the new home, ideally in the first week so you are not left without coverage. 

Once your equipment is moved, a security advisor will carry out a fresh assessment of the new property. Every home is different, and your new address may have more entry points, a different layout, or additional security requirements that were not relevant in your previous home. During the assessment, they can recommend any extra protection you may need, such as additional sensors, smoke alarms, or other security features to ensure the system is tailored to the property.

HomeSecure systems, for example, are wireless, which means they are built with exactly this kind of flexibility in mind. If you are renting rather than buying, the portability question works a little differently. The considerations around tenancy agreements and landlord permissions are covered in the guide to home security for renters. 

What Should You Do With Your Alarm Before You Hand Over the Keys? 

This part is about leaving things tidy for the people moving in after you. A short checklist covers it: 

  • Tell your alarm provider your completion date so they can close or transfer your account. 
  • Confirm with your solicitor whether the system stays or goes as part of the sale. 
  • If the system stays, reset the codes or leave instructions for the new owners to do so. Hand over any documentation, manuals, or provider contact details. 
  • Remove old key fobs if you are taking the system with you, or hand them over if you are not. 
  • Update or close your keyholder list so your former neighbours are not getting calls about a house that is no longer yours. 

What If Your New Home Already Has an Alarm Installed? 

You walk into the new house, there is an alarm box on the front wall and a keypad in the hall, and you have no idea who has the codes, whether the system works, whether it is still monitored, or whether a contract is attached to it. 

Do these three things: 

  1. Find out what you are dealing with. Check the brand and model on the keypad or external box. Look for any documentation the previous owners left behind. If there is a monitoring sticker on the box, that gives you a starting point for contacting the provider.
  2. Have it inspected by a qualified provider. A professional can tell you whether the system is functional, how old it is, and whether it is worth keeping. If the previous owners had a HomeSecure system, the new occupants can call to have monitoring activated with an onsite setup and security assessment. During that visit, a security advisor will assess your household’s needs, which may be quite different from those of the previous owners. For example, families with children may benefit from key tags that make arming and disarming the alarm simpler, while others may wish to add security cameras or additional devices for greater peace of mind.
  3. Change every code and remove old keyholders. Before you rely on the alarm for anything, reset the master code, deactivate old fobs, and set up your own keyholder list from scratch. 

Sometimes the right call is replacing the system entirely rather than trying to revive it. If the alarm is old, wired, or of unknown condition, a fresh wireless install is often simpler, more reliable, and gives you a clean history with no inherited unknowns. 

Not sure what to make of the alarm that came with your new house? Talk it through with a HomeSecure security advisor. We will help you work out whether it is worth keeping and what a fresh start would look like. 

How Soon Should You Sort Security After Moving In? 

Between closing and moving in, the property may sit empty for a few days or even a week. During the sale process, more people than usual may have had access to keys and codes: estate agents, valuers, tradespeople doing snag work, and the previous owners themselves. Routines are not yet established, and neighbours may not recognise who should and should not be coming and going. 

The first week or two is the sensible window. And because a wireless system can be professionally installed within 2 to 5 working days of booking, this does not need to be planned months ahead. It fits neatly into the early days of settling in. 

Not sure whether you need a house alarm? Our guide can help you make an informed decision.

How Do You Set Up Monitoring at Your New Address? 

HomeSecure immediate response alarm sign beside a front door with two people at the entrance.

Getting a monitored alarm up and running at a new address is one of the more painless jobs in a house move. Here is what the process typically looks like: 

StepWhat happens
Home walkthrough An installer assesses your new home’s layout, entry points, and any specific security needs. 
Sensor placement Door sensors, motion detectors, and any additional devices are positioned for optimal coverage. 
Hub and keypad install The central hub and keypad are set up, connecting everything together. 
App setup You get the mobile app configured on your phone so you can arm, disarm, and check your system remotely. 
Keyholder list You choose who gets contacted if the alarm is triggered, giving you a clean start with people you trust. 


With HomeSecure, the typical professional alarm installation takes around 2-3 hours. Our security advisor walks you through everything before they leave, so you are not left guessing how to use your own system. Installation starts from €49, with 24/7 alarm monitoring from HomeSecure’s Dublin centre from €0.99 per day, protecting over 30,000 homes across Ireland.  

Many Irish insurers offer discounts for professionally monitored alarm systems. The exact saving varies by insurer, but it can offset a meaningful share of the monitoring cost over a year. Ask your insurer what they offer and what certification details they need. 

Moving soon? Get your new home covered in one visit. Tell us about your new place and we will take one job off your moving list. 

Get a free no obligation quote today >

FAQs 

Do house alarms stay with the house when you sell in Ireland? 

Usually, if the system is wired. Hardwired alarms are built into the property and are normally treated as fixtures that transfer with the sale unless the contract of sale says otherwise. Wireless alarms are removable, so the seller can take them, but this should be agreed clearly during the sale. If you are unsure either way, ask your solicitor to confirm what the contract includes before completion so there are no surprises on moving day. 

Can I use the alarm system the previous owners left behind? 

Sometimes, but not straight away. First find out what the system is, whether it still works, and whether it is connected to a monitoring service or contract. Then have it inspected by a qualified provider and change every code, since previous owners, their family, or tradespeople may still know them. If the system is old, wired, or of unknown condition, a fresh wireless install is often simpler and more reliable than reviving it. 

Should I change the alarm code when I move into a new house? 

Yes, always, and before you start relying on the alarm. You have no way of knowing how many people were given the code over the years, from previous owners to babysitters to builders. Changing codes, removing old key fobs, and setting up your own keyholder list gives you a clean start. If the system is monitored, contact the provider to move the account into your name at the same time. 

Can I bring my alarm with me when I move house? 

If it is a modern wireless system, generally yes. Wireless sensors and hubs are designed to be removable without structural damage, so they can be taken down and set up again at a new address. Contact your alarm provider before moving day to arrange the details and update your address and monitoring. Wired systems are a different story: they are usually left in place because removal means pulling cabling from walls. 

How quickly can an alarm be installed in a new home? 

Faster than most movers expect. A wireless system like HomeSecure’s typically takes around 2-3 hours to install, and appointments are usually available within 2 to 5 working days anywhere in Ireland. That means you can have a monitored alarm live within your first week in the new house, with the installer walking you through the keypad, app, and sensors before they leave. 

Will a monitored alarm reduce my home insurance when I move? 

Many Irish insurers offer discounts on home insurance for professionally monitored alarm systems, and setting up a policy for a new address is the natural moment to ask. The exact discount varies by insurer and policy, so check what your provider offers and what proof they need, such as certification details from your alarm company. Over a year, the saving can offset a meaningful share of the monitoring cost.

View recent blog posts